- #Really right stuff panorama video how to
- #Really right stuff panorama video series
And at $795 USD (from B&H) is not cheap, nor complete.
The PG-01 which is similar to what we custom-built above at a price of $285 USD (at B&H). Really Right Stuff Multi-Row Pano Package – PG-01 or PG-02 (the Big One) Total weight is about 2 pounds and rated capacity about 7 pounds. Like the system we laid out above, do not expect this rig to hold up your 20 pound camera/lens combination. I have not used one, but found and played with one in a local camera store, and saw that is also available online.
While the bottom head (vertical axis) has handy detent stops, the horizontal axis does not. ProMaster GH25K Gimbal Pan KitĪt about $300 USD, it seems pretty well built. If assembling a multi-row panoramic head from parts is not exciting, there are several pre-built options. #Really right stuff panorama video how to
Since we have plenty of material on how to do this, we will refer you to our prior articles (see the top of this page). WARNING: Not all panning clamps are easily attached to arbitrary ball heads as there is little standardization
If your ball head does NOT have a panning base, then you can buy a second panning clamp and attach that to your ball head clamp (or replace your existing clamp with a panning clamp). NOTE: Be sure to check for level-ness through a complete rotation! Our Acratech Nomad ball head, for example, is not designed to be easily mounted upside down, and this method is what we use. Note this is not easy to get right, but a slight misalignment is usually easy to correct in the stitched photos. You can use the panning base of your ball head. Then align the clamp so that it is level as well. If your ball head has a panning base, you can carefully align the tripod so that the head mount (the deck where your ball head attaches) is level. If you already have a panning clamp on the top deck of your ball head, level the deck and use the existing panning clamp. There are several ways you can proceed if you do not, or cannot use your tripod in this way: This allows us to level what was the base using the ball head and then use the rotation of the base as a horizontal panning clamp. What If I Do NOT Have My Ball Head Upside Down?Īs we show in the video, we have mounted our Acratech GP-s head “upside down”. All the rest go together with the built-on clamps. The only tricky part may be securely mounting the Panoramic clamp to the vertical rail. 
At minimum you will need a bubble level somewhere on the horizontal surface or a means to align the unit perpendicular to the ground.Īssembly is straight forward. ($60-$200) L-Bracket (arca swiss) for your particular camera. And yes, it is designed to be used that way, notice how the markings are repeated so that they are visible right side up, and up side down. This one is not required, but it’s really good and has the advantage of being usable withouta leveling base by using it “upside down”. $430.00 Acratech GPs-s Ballhead with Clamp Ball Head with Arca Clamp. If you have an old tripod head, it may have a panning clamp and/or leveling base that you can re-purpose. While it is heavier, you can use it with a longer lens. Total is about $125 USD and weighs just under 2 pounds. $39.95 Desmond DVC-220 220mm Rail 90° Arca Compatible w Vertical Clamp instead of this 90 degree rail, you can also buy a regular rail (another #3) and a 90 degree clamp. $28.99 Koolehaoda 360° Panoramic Head This unit was chosen because all the other possibilities had very long lead times. $19.99 Neewer 200mm Rail Nodal, Quick Release Clamp. Here is my parts list all purchased from Amazon. Imagine taking a single row panorama, then repointing up (or down) and taking another single row panorama. The no parallax point is usually found IN the lens, and is thus never where you attach the camera to a tripod. In either case, the camera needs to be rotate around the “nodal point” or “no parallax” point. A vertorama is the same idea, except you usually use landscape mode. #Really right stuff panorama video series
Multi-Row Panorama Gear in action at Asilomar State Beach, California What is a Single-Row Panorama (or Vertorama)Ī single row panorama is what you get when you take a series of photos left to right (or right to left) – usually in portrait mode to extend the field of view up to 360 degrees.
0 kommentar(er)
